Von Roll/John C Dolph Dolphon® CC-1105-OPT Solventless One Part Trickle Resin
MFR #:Dolphon® CC-1105-OPT
EIS #:PH21-Dolphon CC-1105-OPT
MFR #:Dolphon® CC-1105-OPT
EIS #:PH21-Dolphon CC-1105-OPT
Von Roll/John C Dolph Dolphon® CC-1105-OPT Solventless One Part Trickle Resin, 9.6 - 10.0 lb/gal At 77 °F (25 °C) Density, 5,300 V/Mil Dielectric Strength, >200 °F Flash Point, 14 - 18 min At 212 °F (100 °C) Gel Time, Mild to Odorless Odor/Scent, 1.2 Specific Gravity, 0.53 BTU/HR/ft²/Inch/°F Thermal Conductivity, 400 - 800 cps (Brookfield Model RVT #1 Spindle At 77 °F (25 °C), 10 rpm) Viscosity. - CC-1105-OPT is a 100% reactive, pre-catalyzed, low odor polyester resin formulated specifically for the trickle impregnation of electric motor armatures and stators. It is also suitable for use by immersion techniques.
$261.07
Select from the options below
Von Roll/John C Dolph Dolphon® CC-1105-OPT Solventless One Part Trickle Resin, 9.6 - 10.0 lb/gal At 77 °F (25 °C) Density, 5,300 V/Mil Dielectric Strength, >200 °F Flash Point, 14 - 18 min At 212 °F (100 °C) Gel Time, Mild to Odorless Odor/Scent, 1.2 Specific Gravity, 0.53 BTU/HR/ft²/Inch/°F Thermal Conductivity, 400 - 800 cps (Brookfield Model RVT #1 Spindle At 77 °F (25 °C), 10 rpm) Viscosity. - CC-1105-OPT is a 100% reactive, pre-catalyzed, low odor polyester resin formulated specifically for the trickle impregnation of electric motor armatures and stators. It is also suitable for use by immersion techniques.
Product Options
Showing 1 out of 1 options
 | Container Size: 5 gal | EIS Part #: DOLCC1105OPT5G | $ / US gallon |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameOne Part Trickle Resin
Trade NameDolphon®
SeriesDolphon® CC-1105-OPT
General Features
TypeSolventless
Design & Construction
ColorLight-Dark Amber
FormLiquid
Performance Details
Gel Time14 min
Technical Details
Flash Point200 °F
Chemical Properties
Specific Gravity1.2
Viscosity400 cP
Electrical Properties
Dielectric Strength5300 V/mil
Physical Properties
Odor/ScentMild to Odorless
Features
- One-part system (pre-catalzyed, requires no catalyst, no mixing errors)
- High bond strength at elevated temperature
- Free of styrene or other monomers of strong odor
- Fast cure at low temperatures
- Included in UL-approved systems up to 220 °C
- Does not boil under vacuum
- High flash point
- 0.3 - 0.5 Mils/side film build
- 1.0 lbs/gal (ASTM D6053) VOC
- <0.01 mmHg at 70 °F (20 °C) vapor pressure
- 30 lbs at 77 °F, 10 lbs at 300 °F bond strength (helical coil method)
- 3.14 dielectric constant
- 7 x 10^16 ohm-cm @ 77 °F (25 °C) volume resistivity
- Dielectric Strength: 5,300 V/Mil
- Flash Point: >200 °F
- Viscosity: 400 - 800 cps/Brookfield Model RVT #1 Spindle at 77 °F/25 °C, 10 rpm)
- Density: 9.6 - 10.0 lb/gal at 77 °F (25 °C)
- Thermal Conductivity: 0.53 BTU/HR/ft²/Inch/°F
- Gel Time: 14 - 18 min
- Viscosity: 400 - 800 cP
Applications
- Armatures
- Automotive Alternators
- Appliance Motors
- Power Tool Motors
- Stators
- Dip or VPI Applications
- Static and Rotating Windings