Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound
- MFR #:Dolphon® CB-1128-B
- EIS #:PH21-Dolphon CB-1128-B
- MFR #:Dolphon® CB-1128-B
- EIS #:PH21-Dolphon CB-1128-B
Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound, Room Temperature Cure Type, 8.8 - 9.0 lb/gal At 77 °F (25 °C) Density, 665 V/Mil Dielectric Strength, 2 - 4 hr At 77 °F Full Cure Time, 45 Shore A At 70 °F Hardness, 100:6 By Weight Mixing Ratio, 130 °C Temperature Rating, 1260 psi Tensile Strength, 12.2 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 100000 cps At 80 °F, 10 rpm Viscosity. - CB-1128 is a unique, two part resin formulated for motor and generator encapsulation. It is available in pre-packaged kits and bulk.
$30.33
- $37.45
Select from the options below
Von Roll/John C Dolph Dolphon® CB-1128-B Two-Part Flexible Motor Compound, Room Temperature Cure Type, 8.8 - 9.0 lb/gal At 77 °F (25 °C) Density, 665 V/Mil Dielectric Strength, 2 - 4 hr At 77 °F Full Cure Time, 45 Shore A At 70 °F Hardness, 100:6 By Weight Mixing Ratio, 130 °C Temperature Rating, 1260 psi Tensile Strength, 12.2 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 100000 cps At 80 °F, 10 rpm Viscosity. - CB-1128 is a unique, two part resin formulated for motor and generator encapsulation. It is available in pre-packaged kits and bulk.
Product Options
Showing 1 out of 1 options
 | Container Size: 55 g | EIS Part #: DOLCB112855GM | $ / Bottle |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameFlexible Motor Compound
Trade NameDolphon®
SeriesDolphon® CB-1128-B
General Features
TypeTwo-Part
Design & Construction
ColorBlack
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time2 - 4 hr at 77 °F
Tensile Strength1260 psi
Chemical Properties
Mixing Ratio100:6 By Weight
Viscosity100000 cP
Electrical Properties
Dielectric Strength665 V/mil
Physical Properties
Hardness45 Shore A at 70 °F
Environmental Condition
Temperature Rating130 °C
Features
- Excellent impact and abrasion resistance
- Excellent thermal conductivity
- Superior water, moisture and chemical resistance
- Flexible over wide temperature ranges (65 to 155 °C)
- Brush or spray applications
- Withstands thermal shock
- Forms protective seal coat
- Tough and flexible
- Works well in harsh environments
- Excellent resistance to chemical attack
- Crack resistant, Salt resistant
- 3.06 x 10^14 Ohms surface resistivity
- 1.78 x 10^15 Ohm-cm volume resistivity
- 0.01% (ASTM D-570-59aT) water absorption
- Viscosity: 100000 cps at 80 °F, 10 rpm
- Density: 8.8 - 9.0 lb/gal at 77 °F (25 °C)
- Thermal Conductivity: 12.2 x 10^-4 Cal/sec/cm^2/°C/cm
Applications
- Sand Pits
- Stone Quarries
- Cement Plants
- Meat Packing Plants
- Canneries
- Poultry Processing Plants
- Dairies
- Breweries
- Telecommunications
- Wood Pulp Plants
- Paper Mills
- Textile Mills
- Dyeing Plants
- Wind Mills
- Automotive (On and Off-Road) Applications
- Marine Applications