Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound
- MFR #Dolphon® CB-1128
- EIS #PH21-Dolphon CB-1128
$74.76 - $291.12
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 8 lb | $ / Kit | |
| 2 lb | $ / Kit | |
| 1 lb | $ / Kit |
Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound, Room Temperature Cure Type, 8.8 - 9.0 lb/gal At 77 °F (25 °C) Density, 665 V/Mil Dielectric Strength, 2 - 4 hr At 77 °F Full Cure Time, 45 Shore A At 70 °F Hardness, 100:6 By Weight Mixing Ratio, 130 °C Temperature Rating, 1260 psi Tensile Strength, 12.2 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 100000 cps At 80 °F, 10 rpm Viscosity. - CB-1128 is a unique, two part resin formulated for motor and generator encapsulation. It is available in pre-packaged kits and bulk.
Features
- Excellent impact and abrasion resistance
- Excellent thermal conductivity
- Superior water, moisture and chemical resistance
- Flexible over wide temperature ranges (65 to 155 °C)
- Brush or spray applications
- Withstands thermal shock
- Forms protective seal coat
- Tough and flexible
- Works well in harsh environments
- Excellent resistance to chemical attack
- Crack resistant, Salt resistant
- 3.06 x 10^14 Ohms surface resistivity
- 1.78 x 10^15 Ohm-cm volume resistivity
- 0.01% (ASTM D-570-59aT) water absorption
- Viscosity: 100000 cps at 80 °F, 10 rpm
- Density: 8.8 - 9.0 lb/gal at 77 °F (25 °C)
- Thermal Conductivity: 12.2 x 10^-4 Cal/sec/cm^2/°C/cm
Applications
- Sand Pits
- Stone Quarries
- Cement Plants
- Meat Packing Plants
- Canneries
- Poultry Processing Plants
- Dairies
- Breweries
- Telecommunications
- Wood Pulp Plants
- Paper Mills
- Textile Mills
- Dyeing Plants
- Wind Mills
- Automotive (On and Off-Road) Applications
- Marine Applications
General Information
| Item Name | Flexible Motor Compound |
| Trade Name | Dolphon® |
| Series | Dolphon® CB-1128 |
General Features
| Type | Two-Part |
Design & Construction
| Color | Black |
| Cure Type | Room Temperature |
| Form | Liquid |
Performance Details
| Full Cure Time | 2 - 4 hr at 77 °F |
| Tensile Strength | 1260 psi |
Chemical Properties
| Mixing Ratio | 100:6 By Weight |
| Viscosity | 100000 cP |
Electrical Properties
| Dielectric Strength | 665 V/mil |
Physical Properties
| Hardness | 45 Shore A at 70 °F |
Environmental Condition
| Temperature Rating | 130 °C |