0
0

Von Roll/John C Dolph Dolphon® CR-1034H-B Epoxy Buttering Kit

The image shown is representative of the product family and may not specifically be the individual item.
  • MFR #:Dolphon® CR-1034H-B
  • EIS #:PH21-Dolphon CR-1034H-B
  • MFR #:Dolphon® CR-1034H-B
  • EIS #:PH21-Dolphon CR-1034H-B
0
0
Von Roll/John C Dolph Dolphon® CR-1034H-B Epoxy Buttering Kit, Epoxy Base Type, Room Temperature Cure Type, 7.8 - 8.2 lb/gal At 77 °F (25 °C) Density, 390 V/Mil (1/8 Inch Specimen) Dielectric Strength, 80 Shore D Hardness, 5 (Part By Weight) Mixing Ratio, 7900 psi (ASTM D638-60T) Tensile Strength, 9 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 50 - 150 cps At 77 °F (25 °C) Viscosity. - CR-1034-H is a semi-rigid, two-part, room curing epoxy resin specifically formulated for encapsulation by buttering on electric motors.
$54.94
Select from the options below
0
0
Von Roll/John C Dolph Dolphon® CR-1034H-B Epoxy Buttering Kit, Epoxy Base Type, Room Temperature Cure Type, 7.8 - 8.2 lb/gal At 77 °F (25 °C) Density, 390 V/Mil (1/8 Inch Specimen) Dielectric Strength, 80 Shore D Hardness, 5 (Part By Weight) Mixing Ratio, 7900 psi (ASTM D638-60T) Tensile Strength, 9 x 10^-4 Cal/sec/cm^2/°C/cm Thermal Conductivity, 50 - 150 cps At 77 °F (25 °C) Viscosity. - CR-1034-H is a semi-rigid, two-part, room curing epoxy resin specifically formulated for encapsulation by buttering on electric motors.

Product Options

Showing 1 out of 1 options
The image shown is representative of the product family and may not specifically be the individual item.
Container Size: 
45 g
EIS Part #: 
DOLCR1034HB2LB
$ / each

Attributes

General Information

Item NameEpoxy Buttering Kit
Trade NameDolphon®

SeriesDolphon® CR-1034H-B

Design & Construction

Base TypeEpoxy
ColorRed
Cure TypeRoom Temperature

Performance Details

Tensile Strength7900 psi

Chemical Properties

Mixing Ratio5 (Part By Weight)
Viscosity50 cP

Electrical Properties

Dielectric Strength390 V/mil

Physical Properties

Hardness80 Shore D