Dynamis BAL-VI EPO Balance Compound
- MFR #BAL-VI
- EIS #PH21-BAL-VI
$52.17 - $407.71
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Pack--Products You May Also Like
| Stock Status | |||
|---|---|---|---|
 | 16 lb | $ / Kit | |
| 2 lb | $ / Kit more info |
EPO Dynaweight BAL-VI is an improved epoxy dynamic balancing compound for rotating parts.It is a dense, two-component epoxy putty that is used to balance the rotors of electric motors or other rotating parts.The mix ratio is 1:1 by volume or by weight.EPO Dynaweight BAL-VI allows for test balancing and adjustment of applied balancing weight until partial cure is achieved.Pot life is approximately 3 hours at room temperature, and cure is achieved in 6-8 hours.Higher temperatures accelerate cure and lower temperatures slow cure. - Used by both OEM's and repair shops. The specific gravity is 2.73 and the mix ratio by weight or by volume.
Features
- Two-component epoxy dynamic balancing compound putty with a 3-3 1/2 hour pot life, and 8-12 hour room temperature cure time
- Leaves no residual color on hands, bulk packaged for high volume use
- Bulk packaged for high volume use
- Full Cure Time: 8 - 12 hr Room Temperature
- Temperature Rating: -80 to 311 °F
Applications
- Used By Both OEM'S and Repair Shops
General Information
| Item Name | EPO Balance Compound |
| Series | BAL-VI |
Design & Construction
| Color - Part-A | Brick Red |
| Color - Part-B | Off White |
| Form | 100% Solid |
Performance Details
| Compression Strength | 6000 psi |
| Full Cure Time | 8 - 12 hr |
| Tensile Strength | 1500 psi |
Chemical Properties
| Specific Gravity | 2.73 |
Electrical Properties
| Dielectric Strength | 450 V/mil |
Physical Properties
| Container Type | Kit |
| Hardness | 70 min |
| Odor/Scent | Slightly Typical Epoxy |
Environmental Condition
| Temperature Rating | 80 °C |
Documents
No Documents Found