0
0

Von Roll 3030 E-Kote® Synthetic Conductive Acrylic Coating, MFR ID VRI-3030

The image shown is representative of the product family and may not specifically be the individual item.
  • MFR #:VRI-3030
  • EIS #:PH11-VRI-3030
  • Series #:3030
  • MFR #:VRI-3030
  • EIS #:PH11-VRI-3030
  • Series #:3030
0
0
E-Kote 3030 is a silver-filled electrically conductive synthetic coating with a thermoplastic base. It sets up by solvent evaporation to form a hard, tough film which may be soldered by using conventional tin-lead solders. E-Kote 3030 may be applied by dipping, brushing or silk-screening. - Viscosity may be reduced as required by thinning with PM acetate. Typical applications for E-Kote 3030 include shielding, printed circuitry and preparation of non-solderable surfaces for soldering.
$278.38
 - $893.08
Select from the options below
0
0
E-Kote 3030 is a silver-filled electrically conductive synthetic coating with a thermoplastic base. It sets up by solvent evaporation to form a hard, tough film which may be soldered by using conventional tin-lead solders. E-Kote 3030 may be applied by dipping, brushing or silk-screening. - Viscosity may be reduced as required by thinning with PM acetate. Typical applications for E-Kote 3030 include shielding, printed circuitry and preparation of non-solderable surfaces for soldering.

Product Options

Showing 2 out of 2 options
The image shown is representative of the product family and may not specifically be the individual item.
Container Size: 
3 oz
EIS Part #: 
EKOTE30303OZ
$ / each
Pack: 6/Carton
The image shown is representative of the product family and may not specifically be the individual item.
Container Size: 
16 oz
EIS Part #: 
EKOTE303016OZ
$ / Ounce
Pack: 64/Carton

Attributes

General Information

Item NameConductive Coating
Trade NameE-Kote®

Series3030

General Features

TypeSynthetic
StandardsOSHA Approved, 29 CFR 1910.1200 Certified
Shelf Life12 Months
Storage TemperatureBelow 30 °C

Design & Construction

ColorSilver
Coverage5 sq-ft/oz
FormLiquid

Performance Details

Application Time15 sec - 30 min
Evaporation Rate1.9
Flame RetardantYes
Full Cure Time16 hr at 25 °C, 30 min at 175 °C
Open Time1 - 15 min
Shear StrengthUp to 300 psi

Chemical Properties

CompositionAcrylic
Specific Gravity1.79
Viscosity700 cP
VOC51%

Physical Properties

Density0.782g/mL
Odor/ScentFruity

Supporting Information

Applicable MaterialsShielding, Printed Circuitry and Preparation of Non-Solderable Surfaces for Soldering