EIS #:E4682FXREDDRUM
EIS #:E4682FXREDDRUM
Out of Stock
Min Qty:1
|Qty Increment:1
more info
more info
Elantas PDG Ripley™ E468-2FX Single-Component Thixotropic Red Epoxy Impregnating Resin, Epoxy Base Type, 1.0389 g/cm3 (77 °F (25 °C)) Density, 2200 V/Mil At 2 Mil - 25 °C/77 °F, 1800 V/Mil At 2 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, 49% At 25 °C/77 °F (ASTM D638) Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 15 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 43 Shore D At 25 °C/77 °F Hardness, 1300 psi At 25 °C/77 °F (ASTM D638) Tensile Strength, 900 - 1250 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-FX Red thixo is a single-component, heat-cured, 100% solids epoxy impregnating resin.
Requires Quote / US pound
Min Qty:1
|Qty Increment:1
more info
more info
Elantas PDG Ripley™ E468-2FX Single-Component Thixotropic Red Epoxy Impregnating Resin, Epoxy Base Type, 1.0389 g/cm3 (77 °F (25 °C)) Density, 2200 V/Mil At 2 Mil - 25 °C/77 °F, 1800 V/Mil At 2 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, 49% At 25 °C/77 °F (ASTM D638) Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 15 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 43 Shore D At 25 °C/77 °F Hardness, 1300 psi At 25 °C/77 °F (ASTM D638) Tensile Strength, 900 - 1250 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-FX Red thixo is a single-component, heat-cured, 100% solids epoxy impregnating resin.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameThixotropic Epoxy Impregnating Resin
Trade NameRipley™
General Features
Net Weight8.5 - 8.9 lb/gal
Shelf Life6 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
ColorRed
FormLiquid
Performance Details
Tensile Strength1300 psi
Full Cure Time4 hr at 135 °C/275 °F or 3 hr at 150 °C/302 °F
Gel Time15 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity900 cP
Electrical Properties
Dielectric Strength2200 V/Mil
Physical Properties
Container Size440 lb
Container TypeDrum
Elongation49% at 25 °C/77 °F (ASTM D638)
Hardness43 Shore D at 25 °C/77 °F
Features
- Flexible for excellent noise suppression
- Thixotropic for higher film build
- No catalyst required
- High flash point
- UL recognized insulation systems up to class 240
- Vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 46 - 50 °C (TMA) glass transition temperature
- 144 ppm / °C (below Tg), 234 ppm / °C (above Tg) coefficient of thermal expansion
- 0.02 at 1 kHz - 25 °C / 77 °F dissipation factor (ASTM D150)
- 3.0 at 1 kHz - 25 °C / 77 °F dielectric constant (ASTM D150)
- 5.1 x 10^15 ohm-cm at 25 °C / 77 °F volume resistivity (ASTM D257)
- Secondary insulation
- Gel Time: 15 - 20 min at 135 °C/275 °F (Sunshine)
- Dielectric Strength: 2200 V/Mil at 2 Mil - 25 °C/77 °F, 1800 V/Mil at 2 Mil - 25 °C/77 °F (After 24 hr in Water)
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 900 - 1250 CP at 25 °C/77 °F
- Density: 1.0308 g/cm3 (77 °F (25 °C))
- Tensile Strength: 1300 psi at 25 °C/77 °F (ASTM D638)
- Gel Time: 15 - 20 min
- Viscosity: 900 - 1250 cP
Applications
- The Ripley™ E 468 Product Line Is the Industry Standard for Impregnation of Transformers of All Sizes