MFR #:119241
EIS #:PDGE400G
MFR #:119241
EIS #:PDGE400G
Temporarily Out of Stock
Min Qty:1
|Qty Increment:1
more info
Elantas PDG Sterling® E400 Two-Component Thermopoxy Epoxy Resin Motor Sealer, Epoxy Base Type, Room Temperature Cure Type, 1.6170 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil (ASTM D149-125 Mil) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
$33.86 / US pound
Min Qty:1
|Qty Increment:1
more info
Elantas PDG Sterling® E400 Two-Component Thermopoxy Epoxy Resin Motor Sealer, Epoxy Base Type, Room Temperature Cure Type, 1.6170 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil (ASTM D149-125 Mil) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameThermopoxy Epoxy Resin Motor Sealer
Trade NameSterling®
SeriesSterling® E400
General Features
Net Weight13.3 - 13.7 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time4 - 8 hr at 25 °C/77 °F
Gel Time15 min
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight and Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener
Viscosity50000 cP
Viscosity - Part-B400 cP
Electrical Properties
Dielectric Strength300 V/Mil
Physical Properties
Container Size12 lb
Hardness82 Shore D (ASTM D2240)
Features
- High bond strength
- Chemical and moisture resistant
- Fast cure in thin films
- Highly filled for improved heat dissipation
- Thixotropic for application on vertical surfaces
- Suitable for class 180 service
- Brush on, knife / spatula application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 3000 PSI at 25 °C / 77 °F, 600 PSI at 193 °C / 380 °F lap shear strength (aluminum to aluminum)
- 2.8% (28 days at 180 °C) weight loss
- 0.5% (28 days at 25 °C / 77 °F) water absorption
- 300 V/Mil at 25 °C / 77 °F - 125 mils dielectric constant
- 4.6 at 1 kHz - 25 °C / 77 °F dissipation factor
- Secondary insulation
- Container Size: 12 lb/1 gal
- Dielectric Strength: 300 V/Mil (ASTM D149-125 Mil)
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 50000 - 100000 CP at 25 °C/77 °F
- Density: 1.6170 g/cm3 (77 °F (25 °C))
- Viscosity - Part-B: 400 - 800 CP at 25 °C/77 °F
- Gel Time: 15 - 25 min
- Viscosity: 50000 - 100000 cP
- Viscosity - Part-B: 400 - 800 cP
Applications
- Protective Overcoat for Motor Windings, Bus Bars, Switch Gear, Etc