Elantas PDG 70 VT High Build Precatalyzed Thixotropic Polyester Resin
- MFR #70 VT
- EIS #PH21-70 VT
$15.87 - $17.16
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 515 lb | $ / US pound | |
| 46 lb | $ / US pound |
Elantas PDG 70 VTC High Build Precatalyzed Thixotropic Polyester Resin, 2100 V/Mil (As Made), 1800 V/Mil (After 24 hr in Water (ASTM D149)) Dielectric Strength, 53 °C (ASTM D93) Flash Point, >10 min (Sunshine) At 125 °C (212 °F) (ASTM D3056) Gel Time, 80 Shore D (ASTM 2240) Hardness, 900 - 1700 CP At 25 °C (77 °F), 20 rpm (ASTM D2196) Viscosity. - The Pedigree 70VTC thixotropic is an unsaturated polyester resin in vinyl toluene. It is it an excellent choice for impregnation of stators.
Features
- Good bond strength
- High film build
- Offers thermal ratings from 130 °C to 220 °C
- Dip and bake, vacuum pressure impregnation (VPI), vacuum impregnation (VI) application methods
- This resin should be stored at 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 4.4 Mils film thickness
- 27 Pounds at 25 °C (ASTM D2519) MW35, 3 pounds at 150 °C helical coil bond strength (ASTM D2519 MW 35)
- Secondary insulation
- Dielectric Strength: 2100 V/Mil (As Made), 1800 V/Mil (After 24 hr in Water (ASTM D149))
- Flash Point: 53 °C (ASTM D93)
- Viscosity: 900 - 1700 CP at 25 °C/77 °F, 20 rpm/ASTM D2196)
- Gel Time: >10 min
- Viscosity: 900 - 1700 cP
Applications
- Impregnation of Stators and Armatures
General Information
| Item Name | Precatalyzed Thixotropic Polyester Resin |
| Series | 70 VT |
General Features
| Shelf Life | 6 Months |
| Type | High Build |
Performance Details
| Gel Time | 10 min |
Technical Details
| Flash Point | 53 °C |
Chemical Properties
| Viscosity | 900 cP |
Electrical Properties
| Dielectric Strength | 2100 V/mil |
Physical Properties
| Hardness | 80 Shore D (ASTM D2240) |