Elantas PDG Esterlite™ 605 Precatalyzed Polyester Impregnating Resin
- MFR #:Esterlite™ 605
- EIS #:PH21-Esterlite 605
- MFR #:Esterlite™ 605
- EIS #:PH21-Esterlite 605
Elantas PDG Esterlite™ 605 Precatalyzed Polyester Impregnating Resin, 1.181 g/cm3 (77 °F (25 °C)) Density, 6700 V/Mil At 25 °C/77 °F - 0.5 Mil (ASTM D149), 4300 V/Mil At 25 °C/77 °F - 0.5 Mil (ASTM D149) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 2 hr At 175 °C (347 °F) or 4 hr At 150 °C (302 °F) or 6 hr At 135 °C (275 °F) Full Cure Time, 20 - 30 min At 125 °C/257 °F Gel Time, 85 Shore D Hardness, 600 - 1000 CP At 25 °C/77 °F Viscosity. - Esterlite™ 605 is a precatalyzed, heat-cured unsaturated polyester resin.
$21.87
- $23.59
Select from the options below
Elantas PDG Esterlite™ 605 Precatalyzed Polyester Impregnating Resin, 1.181 g/cm3 (77 °F (25 °C)) Density, 6700 V/Mil At 25 °C/77 °F - 0.5 Mil (ASTM D149), 4300 V/Mil At 25 °C/77 °F - 0.5 Mil (ASTM D149) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 2 hr At 175 °C (347 °F) or 4 hr At 150 °C (302 °F) or 6 hr At 135 °C (275 °F) Full Cure Time, 20 - 30 min At 125 °C/257 °F Gel Time, 85 Shore D Hardness, 600 - 1000 CP At 25 °C/77 °F Viscosity. - Esterlite™ 605 is a precatalyzed, heat-cured unsaturated polyester resin.
Product Options
Showing 2 out of 2 options
 | Container Size: 48 lb | EIS Part #: PDG605PAIL | $ / US pound | |
| Container Size: 545 lb | EIS Part #: PDG605DRUM | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NamePrecatalyzed Polyester Impregnating Resin
Trade NameEsterlite™
SeriesEsterlite™ 605
General Features
Net Weight9.7 - 10.0 lb/gal
Shelf Life12 Months
Design & Construction
FormLiquid
Performance Details
Full Cure Time2 hr at 175 °C (347 °F) or 4 hr at 150 °C (302 °F) or 6 hr at 135 °C (275 °F)
Gel Time20 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity600 cP
Electrical Properties
Dielectric Strength6700 V/mil
Physical Properties
Hardness85 Shore D
Features
- Outstanding bond strength at high-temperature
- Excellent tank stability
- High flash point
- Resistant to R-22, R-134a and R-123 refrigerants
- Suitable for class 180 service
- Vacuum pressure impregnation (VPI), dip and bake application methods
- Secondary insulation
- Dielectric Strength: 6700 V/Mil at 25 °C/77 °F - 0.5 Mil (ASTM D149), 4300 V/Mil at 25 °C/77 °F - 0.5 Mil (ASTM D149)
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 600 - 1000 CP at 25 °C/77 °F
- Density: 1.181 g/cm3 (77 °F (25 °C))
- Gel Time: 20 - 30 min
- Viscosity: 600 - 1000 cP
Applications
- For Impregnation of Form Wound Motor and Generator Stators