EIS #:PED400PRECDRUM
EIS #:PED400PRECDRUM
Out of Stock
Min Qty:1
|Qty Increment:1
more info
more info
Elantas PDG Sterling® P400 Two-Component Polyester Resin, Room Temperature Cure Type, 1.6170 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil At 25 °C/77 °F - 125 Mil (ASTM D149) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
Requires Quote / US pound
Min Qty:1
|Qty Increment:1
more info
more info
Elantas PDG Sterling® P400 Two-Component Polyester Resin, Room Temperature Cure Type, 1.6170 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil At 25 °C/77 °F - 125 Mil (ASTM D149) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NamePolyester Resin
Trade NameSterling®
SeriesSterling® P400
General Features
Net Weight13.3 - 13.7 lb/gal Resin, 8.5 - 8.7 lb/gal Hardener
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time4 - 8 hr at 25 °C/77 °F
Gel Time15 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity50000 cP
Viscosity - Part-B400 cP
Mixing Ratio100 (Parts By Weight and Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener
Electrical Properties
Dielectric Strength300 V/Mil
Physical Properties
Container Size550 lb
Hardness82 Shore D
Features
- High bond strength
- Chemical and moisture resistant
- Fast cure in thin films
- Highly filled for improved heat dissipation
- Thixotropic for application on vertical surfaces
- Suitable for class 180 service
- Brush on, knife/spatula application methods
- Secondary insulation
- Gel Time: 10 - 20 min at 118 °C/244 °F (Sunshine)
- Dielectric Strength: 300 V/Mil at 25 °C/77 °F - 125 Mil (ASTM D149)
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 50000 - 100000 CP at 25 °C/77 °F
- Density: 1.6170 g/cm3 (77 °F (25 °C))
- Viscosity - Part-B: 400 - 800 CP at 25 °C/77 °F
- Container Size: 550 - 630 lb
- Gel Time: 15 - 25 min
- Viscosity: 50000 - 100000 cP
- Viscosity - Part-B: 400 - 800 cP
Applications
- For Protective Overcoat for Motor Windings, Bus Bars, Switch Gear, Etc., General-Purpose Adhesive