Elantas PDG Pedigree® 1000-70-70 Single-Component Water-Borne Impregnating Resin
MFR #:Pedigree® 1000-70-70
EIS #:PH21-Pedigree 1000-70-70
MFR #:Pedigree® 1000-70-70
EIS #:PH21-Pedigree 1000-70-70
Elantas PDG Pedigree® 1000-70-70 Single-Component, Water-Borne Impregnating Resin, Water Base Type, Heat Cure Type, 3300 V/Mil (Dry), 3100 V/Mil (Wet) Dielectric Strength, 52 °C Flash Point, 4 hr At 135 °C or 2 hr At 150 °C Full Cure Time, 1000 - 3000 CP At 25 °C Viscosity. - Pedigree® 1000-70-70 is a single-component, water-borne, heat-cured impregnating resin. It is supplied as a high-solids solution, for reduction with water to the desired viscosity.
$19.34
- $19.48
Select from the options below
Elantas PDG Pedigree® 1000-70-70 Single-Component, Water-Borne Impregnating Resin, Water Base Type, Heat Cure Type, 3300 V/Mil (Dry), 3100 V/Mil (Wet) Dielectric Strength, 52 °C Flash Point, 4 hr At 135 °C or 2 hr At 150 °C Full Cure Time, 1000 - 3000 CP At 25 °C Viscosity. - Pedigree® 1000-70-70 is a single-component, water-borne, heat-cured impregnating resin. It is supplied as a high-solids solution, for reduction with water to the desired viscosity.
Product Options
Showing 1 out of 1 options
 | Container Size: 493 lb | EIS Part #: PDG1000-70X7055G | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameImpregnating Resin
Trade NamePedigree®
SeriesPedigree® 1000-70-70
General Features
Net Weight8.8 - 9.2 lb/gal
Shelf Life6 Months
TypeSingle-Component, Water-Borne
Design & Construction
Base TypeWater
Cure TypeHeat
FormLiquid
Performance Details
Full Cure Time4 hr at 135 °C or 2 hr at 150 °C
Technical Details
Flash Point52 °C
Chemical Properties
Viscosity1000 cP
Electrical Properties
Dielectric Strength3300 V/mil
Features
- Water-based - reducible with water to 15% non-volatiles
- Low VOC
- Low viscosity for excellent penetration
- UL recognized insulation systems up to class 240
- Dip-and-bake application methods
- Non-volatile content: 67 - 70% at 1-1/2 g - 3 h - 135 °C
- 2.5 pounds/gallon (ASTM D3960-92) volatile organic content
- 28 Pounds at 25 °C / 77 °F, 5 Pounds at 150 °C / 302 °F helical coil bond strength over MW 35
- 0.01 at 1 kHz - 25 °C / 77 °F, 0.03 at 1 kHz - 100 °C / 212 °F, 0.05 at 1 kHz - 150 °C / 302 °F dissipation factor
- 4.0 at 1 kHz - 25 °C / 77 °F, 4.5 at 1 kHz - 100 °C / 212 °F, 4.8 at 1 kHz - 150 °C / 302 °F dielectric constant
- 3.4 x 10^15 ohm-cm at 25 °C / 77 °F, 1.5 x 10^12 ohm-cm at 100 °C / 212 °F, 8.7 x 10^9 ohm-cm at 150 °C / 302 °F volume resistivity
- Secondary insulation
- Dielectric Strength: 3300 V/Mil (Dry), 3100 V/Mil (Wet)
- Viscosity: 1000 - 3000 CP at 25 °C
- Viscosity: 1000 - 3000 cP
Applications
- For Impregnation of Motor and Transformer Windings