Elantas PDG Isonel® 31-398 Single-Component Solvent-Borne Impregnating Resin
MFR #:Isonel® 31-398
EIS #:PH21-Isonel 31-398
MFR #:Isonel® 31-398
EIS #:PH21-Isonel 31-398
Isonel® 31-398 is a general-purpose, modified polyester varnish for conventional dip and bake application. Specially formulated for use in abbreviated baking cycles, it cures quickly to a clear, tough, semi rigid film. - Isonel® 31-398 is a single-component, solvent borne, heat-cured impregnating resin. ISONEL 31-398 provides excellent performance and economy in Class A (105 °C) through Class H (180 °C) design applications.
$14.91
- $16.33
Select from the options below
Isonel® 31-398 is a general-purpose, modified polyester varnish for conventional dip and bake application. Specially formulated for use in abbreviated baking cycles, it cures quickly to a clear, tough, semi rigid film. - Isonel® 31-398 is a single-component, solvent borne, heat-cured impregnating resin. ISONEL 31-398 provides excellent performance and economy in Class A (105 °C) through Class H (180 °C) design applications.
Product Options
Showing 2 out of 2 options
Container Size: 424 lb | EIS Part #: PDG3139855G | $ / US pound | ||
Container Size: 39 lb | EIS Part #: PDG3139839LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameImpregnating Resin
Trade NameIsonel®
SeriesIsonel® 31-398
General Features
Shelf Life12 Months
TypeSingle-Component, Solvent-Borne
Design & Construction
ColorClear
Cure TypeOven Cure
FormLiquid
Performance Details
Full Cure Time2 hr at 150 °C or 1 hr at 163 °C
Technical Details
Flash Point33 °C
Chemical Properties
Viscosity275 cP
Electrical Properties
Dielectric Strength4200 V/mil
Environmental Condition
Temperature Rating180 °C
Features
- Specially formulated for use in abbreviated baking schedules
- Low viscosity for excellent penetration
- Excellent tank stability
- Secondary insulation
- Dielectric Strength: 4200 V/Mil (Dry), 3100 V/Mil (Wet)
- Viscosity: 275 - 375 CP at 25 °C
- Viscosity: 275 - 375 cP
Applications
- For Impregnation of Motor and Transformer Windings