MFR #:VTN-200
EIS #:PH21-VTN-200
Series #:VTN-200
MFR #:VTN-200
EIS #:PH21-VTN-200
Series #:VTN-200
3M™ Heat Shrink Tubing VTN-200 is highly abrasive and cut through resistant and can withstand a wide variety of fuels, lubricants, acids and highly corrosive fluids at high operating temperatures. - In addition to its high continuous operating temperature and chemical-resistance properties, this tubing is very flexible and is easily marked by hot-stamp or print-wheel methods.
$959.30
- $4,962.35
Select from the options below
3M™ Heat Shrink Tubing VTN-200 is highly abrasive and cut through resistant and can withstand a wide variety of fuels, lubricants, acids and highly corrosive fluids at high operating temperatures. - In addition to its high continuous operating temperature and chemical-resistance properties, this tubing is very flexible and is easily marked by hot-stamp or print-wheel methods.
Product Options
Showing 8 out of 10 options
Length: 100 ft | Expandable Diameter: 0.875 Inch | EIS Part #: VTN2007/8BLK1 | $ / Foot Pack: 1 Spool/Case | ||
Length: 200 ft | Expandable Diameter: 0.375 Inch | EIS Part #: VTN2003/8BLK1 | $ / Foot Pack: 1 Spool/Case | ||
Length: 100 ft | Expandable Diameter: 0.75 Inch | EIS Part #: VTN2003/4BLK1 | $ / Foot Pack: 1 Spool/Case | ||
Length: 200 ft | Expandable Diameter: 0.187 Inch | EIS Part #: VTN2003/16BLK1 | $ / Foot Pack: 1 Spool/Case | ||
Length: 50 ft | Expandable Diameter: 2 Inch | EIS Part #: VTN2002BLK1 | $ / Foot Pack: 1 Spool/Case | ||
Length: 50 ft | Expandable Diameter: 1 Inch | EIS Part #: VTN2001BLK1 | $ / Foot Pack: 1 Spool/Carton | ||
Length: 200 ft | Expandable Diameter: 0.125 Inch | EIS Part #: VTN2001/8BLK | $ / Foot Pack: 1 Spool/Case | ||
Length: 200 ft | Expandable Diameter: 0.25 Inch | EIS Part #: VTN2001/4BLK1 | $ / Foot Pack: 1 Spool/Case |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameHeat Shrink Tubing
SeriesVTN-200
General Features
TypeSpecial Purpose
Design & Construction
ColorBlack
Insulation MaterialModified Fluoroelastomer
Minimum Shrink Temperature175 °C
Performance Details
Tensile Strength2400 psi
Heat Aging4 hr
Shrink Ratio2:1
Low Temperature Flexibility55 °C
Chemical Properties
Specific Gravity1.7
Electrical Properties
Dielectric Strength500 V/Mil
Physical Properties
Elongation450%
Features
- Highly resistant to cut through and abrasion
- When heated in excess of 175 °C (347 °F), VTN-200 tubing rapidly shrinks to a skintight fit
- When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter
- The recovered wall thickness is proportional to the degree of recovery
- Non-corrosive chemical effect
- Self-extinguishing
- Volume Resistivity: 10^12 Ohm-cm
- Low Temperature Flexibility: -55 °C
- Temperature Rating: -55 to 200 °C
Applications
- Synthetic Fuel and Hydraulic Oil Resistant Applications, Used to Protect Wiring and Component Covers in Aircraft/Aerospace Applications Including Electronic Control Systems and Hydraulic Fluid Transport Mechanisms and in Chemical Plants