Products You May Also Like
3M™ MDT Tubing offers increased flexibility in combination with excellent abrasion, corrosion and environmental resistance properties and meets MILDTL-23053/15, Class 2. Uncoated product (without sealant) is available on special order. 3M MDT medium-duty tubing is designed to provide reliable performance as well as excellent mechanical and environmental protection. These flame-retardant products combine the important advantages of easy handling and installation with maximum operating reliability and system protection. MDT comes with a factory-applie sealant. This sealant is a heat-activated thermoplastic material that remains soft and flexible over long periods under adverse environmental conditions. During heating the sealant softens, bonds to underlying surfaces and fills small voids that might be present. When cool, the sealant forms a barrier against water, moisture, dirt and other environmental contaminants.
Features
- MDT comes with a factory-applied sealant
- This sealant is a heat-activated thermoplastic material that remains soft and flexible over long periods under adverse environmental conditions
- During heating the sealant softens, bonds to underlying surfaces and fills small voids that might be present
- When cool, the sealant forms a barrier against water, moisture, dirt and other environmental contaminants
- Non-nutrient fungus resistance
- Non-corrosive chemical effect
- Self-extinguishing
- No dripping, flowing or cracking (4 hr at 225 °C) of heat shock
- Conductor Size: 2-2/0 AWG
- Volume Resistivity: 10^14 Ohm-cm
- Wall Thickness: 0.1 Inch (Recovered)
- Low Temperature Flexibility: -55 °C
- Temperature rating: -55 to 110 °C
Applications
- MDT Tubing Installs Easily and Has Shrink Ratios to Accommodate Effective Insulating and Sealing Over Large Transitions, Splices and Battery Cables
General Information
| Item Name | Heat Shrink Tubing |
| Trade Name | 3M |
General Features
| Standards | MIL-DTL-23053/15 Class 2 Specified |
Design & Construction
| Color | Red/Black |
| Insulation Material | Polyolefin |
| Material | Polyolefin |
| Minimum Shrink Temperature | 121 °C |
| Wall Type | Medium |
Performance Details
| Flame Retardant | Yes |
| Heat Aging | 7 Days |
| Heat Shock | 4 hr |
| Low Temperature Flexibility | -55 °C |
| Shrink Ratio | 3:1 |
| Tensile Strength | 2400 psi |
Chemical Properties
| Specific Gravity | 1.28 |
Electrical Properties
| Dielectric Strength | 500 V/Mil |
Physical Properties
| Conductor Size | 2-20 AWG |
| Elongation | 475% |
| Expandable Diameter | 1.1 Inch |
| Length | 4 ft |
| Recovered Diameter | 0.37 Inch |
| Wall Thickness | 0.1 Inch |
| Water Absorption | 0.2% |
Environmental Condition
| Temperature Rating | -55 to 110 °C |
Documents