$43.52 / US pound
Available to Order
Min QTY1QTY Increment1more info
Mix Resin and Hardener in recommended ratio until homogenous. Apply with spatula, trowel or stiff brush. Products are filled and sold by weight and may contain less than the nominal volume of the container - ELAN-Tron® C 49 Hardener is part of a filled, 100% solids, two-component epoxy resin systems.
Features
- Non-flowing paste
- Room temperature cure
- Mix resin and hardener in recommended ratio until homogeneous, apply with spatula, trowel or stiff brush application methods
- 0.05% (ASTM D2566) linear shrinkage
- 0.14% (ASTM D570, 24 hours at 25 °C / 77 °F) water absorption
- 59 °C (By DSC) glass transition temperature
- 55 ppm / °C (below Tg) coefficient of thermal expansion
- 4.6 x 10^10 Ohm-cm at 25 °C / 77 °F, 6.0 x 10^9 Ohm-cm at 100 °C / 212 °F volume resistivity
- 1.2% (24 hours at 180 °C / 356 °F) weight loss
- 2.4 at 1 kHz - 25 °C / 77 °F, 3.5 at 1 kHz - 100 °C / 212 °F dielectric constant
- 0.01 at 1 kHz - 25 °C / 77 °F, 0.11 at 1 kHz - 100 °C / 212 °F dissipation factor
- Gel Time: 15 - 30 min (300 g) at 25 °C/77 °F, 4 - 8 min (Sunshine 15 g) at 80 °C/176 °F
- Container Size: 13.25 lb/1 gal
- Flash Point: >62 °C (ASTM D93)
- Density: 2.0710 g/cm3 (77 °F (25 °C))
- Viscosity - Part-B: 220000 - 4200000 CP at 25 °C/77 °F (2 rpm), 90000 - 180000 CP at 25 °C/77 °F (20 rpm)
- Viscosity - Part-B: 220000 - 4200000 cP
General Information
| Item Name | Hardener |
| Trade Name | Elan-Tron® |
| Series | Elan-Tron® C 49 |
General Features
| Net Weight | 17.1 - 17.5 lb/gal |
| Shelf Life | 12 Months |
Design & Construction
| Cure Type | Room Temperature |
| Form | Liquid |
Performance Details
| Full Cure Time | 3 hr at 65 °C/140 °F |
Technical Details
| Flash Point | 62 °C |
Chemical Properties
| Mixing Ratio | 100 (Parts By Weight and Volume) Resin, 110 (Parts By Weight) 86 (Parts By Volume) Hardener |
| Viscosity - Part-B | 220000 cP |
Physical Properties
| Container Size | 13.25 lb |
| Container Type | Can |
| Hardness | 85 Shore D |