Elantas PDG Ripley™ E468-2-7FC-55F Single-Component Epoxy VPI Resin
- MFR #Ripley™ E468-2-7FC-55F
- EIS #PH21-Ripley E468-2-7FC-55F
$34.47
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 550 lb | $ / US pound |
Elantas PDG Ripley™ E468-2-7FC-55F Single-Component Epoxy VPI Resin, Epoxy Base Type, 1.5528 g/cm3 (77 °F (25 °C)) Density, 2000 V/Mil At 0.5 Mil - 25 °C/77 °F, 1400 V/Mil At 0.5 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, 20% At 25 °C/77 °F (ASTM D638) Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 12 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 65 - 75 At 25 °C/77 °F Hardness, 2400 psi At 25 °C/77 °F Tensile Strength, 4000 - 8000 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-7FC-55F is a single-component, heat-cured, 100% solids epoxy impregnating resin, mineral-filled for enhanced heat dissipation, secondary insulation.
Features
- Flexible for excellent noise suppression
- No catalyst required
- High flash point
- UL recognized insulation systems up to class 240
- Vacuum-pressure impregnation, vacuum impregnation application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 47 - 52 °C (TMA) glass transition temperature
- 63 ppm / °C (below Tg), 142 ppm / °C (above Tg) coefficient of thermal expansion
- 0.01 at 1 kHz - 25 °C / 77 °F dissipation factor (ASTM D150)
- 3.4 at 1 kHz - 25 °C / 77 °F dielectric constant (ASTM D150)
- 7.0 x 10^15 ohm-cm at 25 °C / 77 °F volume resistivity (ASTM D257)
Applications
- The Ripley™ E 468 Product Line Is the Industry Standard for Impregnation of Transformers of All Sizes
General Information
| Item Name | Epoxy VPI Resin |
| Trade Name | Ripley™ |
| Series | Ripley™ E468-2-7FC-55F |
General Features
| Net Weight | 12.8 - 13.2 lb/gal |
| Shelf Life | 6 Months |
| Type | Single-Component |
Design & Construction
| Base Type | Epoxy |
| Form | Liquid |
Performance Details
| Full Cure Time | 4 hr at 135 °C/275 °F or 3 hr at 150 °C/302 °F |
| Gel Time | 12 min |
| Tensile Strength | 2400 psi |
Technical Details
| Flash Point | 94 °C |
Chemical Properties
| Viscosity | 4000 cP |
Electrical Properties
| Dielectric Strength | 2000 V/mil |
Physical Properties
| Elongation | 20% at 25 °C/77 °F (ASTM D638) |
| Hardness | 65 - 75 at 25 °C/77 °F |