MFR #:Epoxylite® E477
EIS #:PH21-Epoxylite E477
MFR #:Epoxylite® E477
EIS #:PH21-Epoxylite E477
Elantas PDG Epoxylite® E477 Single-Component Epoxy VPI Resin, Epoxy Base Type, 2600 V/Mil At ASTM D149 - 1.0 Mil Dielectric Strength, >94 °C (ASTM D93) Flash Point, 5 hr At 160 °C/320 °F Full Cure Time, 85 - 90 Shore D At 25 °C/77 °F Hardness, 1000 - 2500 CP At 25 °C/77 °F Viscosity. - Epoxylite® E 477 is a single-component, heat cured, epoxy impregnating resin, secondary insulation, 0.003 at 1 kHz - 25 °C / 77 °F dissipation factor.
$41.94
- $47.25
Select from the options below
Elantas PDG Epoxylite® E477 Single-Component Epoxy VPI Resin, Epoxy Base Type, 2600 V/Mil At ASTM D149 - 1.0 Mil Dielectric Strength, >94 °C (ASTM D93) Flash Point, 5 hr At 160 °C/320 °F Full Cure Time, 85 - 90 Shore D At 25 °C/77 °F Hardness, 1000 - 2500 CP At 25 °C/77 °F Viscosity. - Epoxylite® E 477 is a single-component, heat cured, epoxy impregnating resin, secondary insulation, 0.003 at 1 kHz - 25 °C / 77 °F dissipation factor.
Product Options
Showing 1 out of 1 options
Container Size: 45 lb | EIS Part #: EPO477PAIL | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy VPI Resin
Trade NameEpoxylite®
SeriesEpoxylite® E477
General Features
Net Weight9.4 - 9.7 lb/gal
TypeSingle-Component
Design & Construction
Base TypeEpoxy
Performance Details
Full Cure Time5 hr at 160 °C/320 °F
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity1000 cP
Electrical Properties
Dielectric Strength2600 V/mil
Physical Properties
Hardness85 - 90 Shore D at 25 °C/77 °F
Features
- High adhesion and mechanical strength to provide protection against vibration, shock and severe mechanical abuse
- Excellent chemical resistance for operation in corrosive environments and occasional exposure to washdown and flooding
- No catalyst required
- Recommended for service up to Class 180
- Vacuum-pressure impregnation, vacuum impregnation application methods
- 56 Pounds at 25 °C / 77 °F helical coil bond strength
- > 1 x 10^16 ohm-cm at 25 °C / 77 °F volume resistivity
- 4.4 at 1 kHz - 25 °C / 77 °F dielectric constant
- Viscosity: 1000 - 2500 cP
Applications
- Specifically Designed for VPI Processing of Dry taped, Form Wound Coils: Class 130 -13.8 kV, Class 155 - 6.9 kV, Class 180 - 4.2 kV