Elantas PDG Epoxylite® E230 Two-Component Epoxy Impregnating Resin
- MFR #Epoxylite® E230
- EIS #PH21-Epoxylite E230
$183.16 - $1,149.40
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 1 lb | $ / each | |
| 4 Oz | $ / Case Pack: 20/Case | |
| 2 lb | $ / each |
Elantas PDG Epoxylite® E230 Two-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.1620 g/cm3 (77 °F (25 °C)) Density, 1700 V/Mil At 25 °C/77 °F - 3 Mil Dielectric Strength, 248 °C (ASTM D93) Flash Point, 16 hr At 60 °C/140 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 75 - 85 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 20 (Parts By Weight) 22.6 (Parts By Volume) Hardener Mixing Ratio, 3000 - 6000 CP At 25 °C/77 °F Viscosity, 10000 - 15000 CP At 25 °C/77 °F (Material As Supplied) Viscosity - Part-A, 100 - 500 CP At 25 °C/77 °F Viscosity - Part-B. - Epoxylite® E 230 epoxy is a two-component, low temperature curing, 100%-solids resin system, secondary insulation.
Features
- Excellent penetration in trickle application
- High bond strength
- Chemical, refrigerant and moisture resistant
- Fast cure with low heat
- Ideal for appliance motors and other high-speed rotating devices
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- Trickle application method
- 40 Pounds at 25 °C / 77 °F, 4 Pounds at 150 °C / 302 °F helical coil bond strength (ASTM D2519 over MW 35)
- < 1.0% (NEMA RE-2) R-22 extractable material
- 0.2% (24 hours at 25 °C / 77 °F) water absorption
- 1.1 x 10^15 Ohm-cm (ASTM D257 - 25 °C / 77 °F) volume resistivity
- 3.8 at 1 kHz - 25 °C / 77 °F dielectric constant
- 0.03 at 1 kHz - 25 °C / 77 °F dissipation factor
- Gel Time: 15 - 25 min at 25 °C/77 °F (250 g)
- Gel Time: 15 - 25 min
- Viscosity: 3000 - 6000 cP
- Viscosity - Part-A: 10000 - 15000 cP
- Viscosity - Part-B: 100 - 500 cP
Applications
- Impregnation of Motor and Transformer Windings Including High-Speed Armatures, Protective Overcoat for Motor Windings
General Information
| Item Name | Epoxy Impregnating Resin |
| Trade Name | Epoxylite® |
| Series | Epoxylite® E230 |
General Features
| Net Weight | 9.5 - 9.9 lb |
| Shelf Life | 12 Months |
| Type | Two-Component |
Design & Construction
| Base Type | Epoxy |
| Color | Amber |
| Form | Liquid |
Performance Details
| Full Cure Time | 16 hr at 60 °C/140 °F |
| Gel Time | 15 min |
Technical Details
| Flash Point | 248 °C |
Chemical Properties
| Mixing Ratio | 100 (Parts By Weight and Volume) Resin, 20 (Parts By Weight) 22.6 (Parts By Volume) Hardener |
| Viscosity | 3000 cP |
| Viscosity - Part-A | 10000 cP |
| Viscosity - Part-B | 100 cP |
Electrical Properties
| Dielectric Strength | 1700 V/mil |
Physical Properties
| Hardness | 75 - 85 Shore D |