$31.18 / US pound
Available to Order
Min QTY1QTY Increment1more info
Elantas PDG Elan-Guard® EM 59-60MR Single-Component, Emulsion Epoxy Hermetic Resin, Epoxy Base Type, 1.0916 g/cm3 (77 °F (25 °C)) Density, 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water) Dielectric Strength, 100 °C Flash Point, 4 hr At 150 °C/302 °F or 2 hr At 165 °C/329 °F Full Cure Time, 500 - 1500 CP At 25 °C/77 °F Viscosity. - EM 59-60MR is single component water based hermetic resin. In the liquid state it is a white opaque liquid.
Features
- Low viscosity
- Thinned with water
- UL recognized insulation systems from 130 °C to 200 °C
- Excellent stability
- Zero volatile organic compounds (VOC)
- Dip-and-bake, roll dip application methods
- This resin should be stored at 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 58 - 62% (ASTM D115) percent non-volatile matter
- 65 Pounds at 25 °C / 77 °F, 38 Pounds at 107 °C / 225 °F helical coil bond strength (ASTM D2519)
- < 1.0% (NEMA RE-2) freon resistance
- 1.1 Mils film thickness
- Secondary insulation
- Dielectric Strength: 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water)
- Viscosity: 500 - 1500 CP at 25 °C/77 °F
- Density: 1.0916 g/cm3 (77 °F (25 °C))
- Viscosity: 500 - 1500 cP
Applications
- Impregnation of Small and Large Hermetic Stators
General Information
| Item Name | Epoxy Hermetic Resin |
| Trade Name | Elan-Guard® |
| Series | Elan-Guard® EM 59-60MR |
General Features
| Shelf Life | 12 Months |
| Type | Single-Component, Emulsion |
Design & Construction
| Base Type | Epoxy |
| Form | Liquid |
Performance Details
| Full Cure Time | 4 hr at 150 °C/302 °F or 2 hr at 165 °C/329 °F |
Technical Details
| Flash Point | 100 °C |
Chemical Properties
| Viscosity | 500 cP |
Electrical Properties
| Dielectric Strength | 3500 V/mil |
Physical Properties
| Container Size | 450 lb |
| Container Type | Drum |