MFR #:Scotchcast™ 5
EIS #:PH21-Scotchcast 5
MFR #:Scotchcast™ 5
EIS #:PH21-Scotchcast 5
Electrical and electronic applications designed to operate at 130 °C (Class B) temperatures are the intended areas of use for 3M™ Scotchcast™ Electrical Resin 5. This transparent resin offers good physical and electrical properties plus low viscosity for maximum impregnating qualities. - 3M™ Scotchcast™ electrical resin 5 is a general purpose, very low viscosity, chemical and moisture-resistant, transparent epoxy with a long pot life and low exotherm when compared to similar products.
$124.12
- $849.22
Select from the options below
Electrical and electronic applications designed to operate at 130 °C (Class B) temperatures are the intended areas of use for 3M™ Scotchcast™ Electrical Resin 5. This transparent resin offers good physical and electrical properties plus low viscosity for maximum impregnating qualities. - 3M™ Scotchcast™ electrical resin 5 is a general purpose, very low viscosity, chemical and moisture-resistant, transparent epoxy with a long pot life and low exotherm when compared to similar products.
Product Options
Showing 1 out of 1 options
Container Size: 14 lb | EIS Part #: 3MR0514LB | $ / Kit |
- Attributes
- Features
- Documents
Attributes
General Information
Item NameEpoxy Electrical Resin
Trade NameScotchcast™
SeriesScotchcast™ 5
General Features
TypeRigid
Design & Construction
Base TypeEpoxy
ColorTransparent Yellow
Cure TypeRoom Temperature
FormLiquid
Performance Details
Tensile Strength8000 psi
Flexural Strength12000 psi
Moisture Absorption0.5% Weight Increase 240 hr at 96% R.H
Gel Time18 min
Chemical Properties
Mixing Ratio2:1 (Weight), 63.5:36.5 (Volume %)
Specific Gravity1.12
Viscosity3000 cP
Viscosity - Part-A12500 cP
Viscosity - Part-B100 cP
Electrical Properties
Dielectric Strength325 V/mil
Physical Properties
Container TypeKit
Elongation7% at Break
Hardness15 Shore D (BARCOL)
Environmental Condition
Temperature Rating130 °C
Features
- Good physical properties
- Reversion resistant
- Low viscosity
- Unfilled epoxy liquid resin
- 17.7 x 10^-5 Length/unit length/°C linear thermal expansion
- 13,200 psi compressive strength
- 3.6 at 1000 Hz 23 °C dielectric constant
- 0.06 at 1000 Hz 23 °C dissipation factor
- 10^14 Ohm-cm volume resistivity
- Flash Point: A = 232 °C, B = 82 °C
- Viscosity: 3000 cps at 23 °C/73 °F
- Density: A = 1.16 kg/l, B = 0.995 kg/l
- Temperature Rating: Class B (< or equal 130 °C)
- Thermal Conductivity: 4.4 x 10^-4 Cal/sec/cm^2/°C/cm
- Viscosity - Part-B: 100 cps at 23 °C/73 °F