Elantas PDG Sterling® EA50 Two-Component Epoxy Adhesive System, 6 Gram Kit, MFR ID PDG43-150KIT
- MFR #:117424
- EIS #:PDG43-150KIT
- MFR #:117424
- EIS #:PDG43-150KIT
Available to Order
Min Qty:1
|Qty Increment:1
Elantas PDG Sterling® EA50 Two-Component Epoxy Adhesive System, Epoxy Base Type, Room Temperature Cure Type, >94 °C (ASTM D93) Flash Point, 96 hr At 25 °C/77 °F or 2 hr At 163 °C to 177 °C/325 °F to 350 °F Full Cure Time. - Sterling® E A50 T-7B is a filled, 100%-solids, two-component epoxy resin system.
$97.63 / Kit
Min Qty:1
|Qty Increment:1
Elantas PDG Sterling® EA50 Two-Component Epoxy Adhesive System, Epoxy Base Type, Room Temperature Cure Type, >94 °C (ASTM D93) Flash Point, 96 hr At 25 °C/77 °F or 2 hr At 163 °C to 177 °C/325 °F to 350 °F Full Cure Time. - Sterling® E A50 T-7B is a filled, 100%-solids, two-component epoxy resin system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Adhesive System
Trade NameSterling®
SeriesSterling® EA50
General Features
Net Weight15.1 - 15.5 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
FormPaste
Performance Details
Full Cure Time96 hr at 25 °C/77 °F or 2 hr at 163 to 177 °C/325 to 350 °F
Technical Details
Flash Point94 °C
Physical Properties
Container Size6 g
Features
- Room temperature or heat cure
- Thixotropic for minimal flow during cure
- Supplied in 6-gram pre-weighed, two-component burst-packs
- Conforms to GE aircraft engine group specification A50T7 class B requirements
- Break burst-pack dividing seal, mix resin and hardener together by kneading with fingers until homogeneous
- Gel Time: 15 - 20 min at 125 °C/257 °F (Sunshine)
- Flash Point: >94 °C (ASTM D93)
Applications
- For Metal-To-Metal Adhesive and Sealant for Applications Requiring Oil and Jet Fuel Resistance