Elantas PDG RanVar™ TR319 Two-Component Epoxy Adhesive/Sealant Resin, 2.75 lb/1 qt
MFR #:119897
EIS #:RANTR319A/BQK
MFR #:119897
EIS #:RANTR319A/BQK
Out of Stock
Min Qty:1
|Qty Increment:1
Elantas PDG RanVar™ TR319 Two-Component Epoxy Adhesive/Sealant Resin, Epoxy Base Type, Room Temperature Cure Type, >94 °C (ASTM D93) Flash Point, Within 4 - 6 hr Full Cure Time, 30 - 50 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D Hardness, 100 (Parts By Weight) Resin, 10 (Parts By Weight) Hardener Mixing Ratio, >12000 psi (ASTM D229) Tensile Strength, 40000 - 80000 CP At 25 °C / 77 °F Viscosity, 100000 - 150000 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-A, 145 - 18 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-B. - RanVar™ TR-319 epoxy is a two component, room temperature curing, 100% solids resin system.
$301.72 / Kit
Min Qty:1
|Qty Increment:1
Elantas PDG RanVar™ TR319 Two-Component Epoxy Adhesive/Sealant Resin, Epoxy Base Type, Room Temperature Cure Type, >94 °C (ASTM D93) Flash Point, Within 4 - 6 hr Full Cure Time, 30 - 50 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D Hardness, 100 (Parts By Weight) Resin, 10 (Parts By Weight) Hardener Mixing Ratio, >12000 psi (ASTM D229) Tensile Strength, 40000 - 80000 CP At 25 °C / 77 °F Viscosity, 100000 - 150000 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-A, 145 - 18 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-B. - RanVar™ TR-319 epoxy is a two component, room temperature curing, 100% solids resin system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Adhesive/Sealant Resin
Trade NameRanVar™
SeriesRanVar™ TR319
General Features
Net Weight13.4 - 13.7 lb/gal Resin, 8.2 - 8.5 lb/gal Hardener
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
Performance Details
Tensile Strength12000 psi
Full Cure TimeWithin 4 - 6 hr
Gel Time30 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity40000 cP
Viscosity - Part-A100000 cP
Viscosity - Part-B145 cP
Mixing Ratio100 (Parts By Weight) Resin, 10 (Parts By Weight) Hardener
Physical Properties
Container Size2.75 lb
Hardness82 Shore D
Features
- Controlled thixotropy for both vertical and horizontal surfaces
- Fast cure in thin films
- Brush, spatula Or putty knife application methods, may be thinned with xylene for spray application
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 2.5 x 10^12 ohm-cm (ASTM D257 - 100 °C / 212 °F) volume resistivity
- 5.1 at 60 kHz - 100 °C / 212 °C dielectric constant
- 0.005 at 60 kHz - 100 °C / 212 °C dissipation factor
- 0.15% (24 hours at 25 °C / 77 °F) water absorption
- 2.1% (28 hours at 150 °C / 302 °F) weight loss
- Gel Time: 50 - 100 min at 25 °C/77 °F (250 g)
- Container Size: 2.75 lb/1 qt
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 40000 - 80000 CP at 25 °C / 77 °F
- Viscosity - Part-B: 145 - 18 CP at 25 °C/77 °F (20 rpm)
- Tensile Strength: >12000 psi (ASTM D229)
- Gel Time: 30 - 50 min
- Viscosity: 40000 - 80000 cP
- Viscosity - Part-A: 100000 - 150000 cP
- Viscosity - Part-B: 145 - 18 cP
Applications
- General Purpose Adhesive for Applications Requiring Sag Resistance, Bus Bar Coating, General Sealing and Patching of Electrical Equipment