Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, 8 lb/1 gal
MFR #:119777
EIS #:EPO2388LB
MFR #:119777
EIS #:EPO2388LB
Out of Stock
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, Epoxy Base Type, Room Temperature Cure Type, 1.1846 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 4 hr At 93 °C/200 °F Gel Time, 100 (Parts By Weight) Mixing Ratio, 25000 - 45000 CP At 25 °C/77 °F 20 rpm Viscosity - Part-A, 5 - 20 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-B. - ELAN-Tron® E 238 resin/C 238 hardener is a 100%-solids, two-component epoxy system.
$841.11 / Kit
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Tron® E238 Two-Component Anode Bridge Laminating Epoxy Resin, Epoxy Base Type, Room Temperature Cure Type, 1.1846 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 4 hr At 93 °C/200 °F Gel Time, 100 (Parts By Weight) Mixing Ratio, 25000 - 45000 CP At 25 °C/77 °F 20 rpm Viscosity - Part-A, 5 - 20 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-B. - ELAN-Tron® E 238 resin/C 238 hardener is a 100%-solids, two-component epoxy system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameAnode Bridge Laminating Epoxy Resin
Trade NameElan-Tron®
SeriesElan-Tron® E238
General Features
Net Weight9.7 - 10.1 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
FormLiquid
Performance Details
Gel Time4 hr
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight)
Viscosity - Part-A25000 cP
Viscosity - Part-B5 cP
Physical Properties
Container Size8 lb
Features
- Room temperature or low heat cure
- Thixotropic for minimal run-off
- Semi-rigid
- Excellent resistance to chemicals and moisture
- Suitable for continuous service up to 121 °C / 250 °F
- Brush, roller coat application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 60 min at 100g - 25 °C / 77 °F pot life
- 2700 PSI at 25 °C / 77 °F lap shear strength (aluminum - aluminum)
- 700 PSI at 25 °C / 77 °F lap shear strength (aluminum - rigid vinyl)
- Container Size: 8 lb/1 gal
- Flash Point: >94 °C (ASTM D93)
- Density: 1.1846 g/cm3 (77 °F (25 °C))
- Viscosity - Part-B: 5 - 20 CP at 25 °C/77 °F (20 rpm)
- Viscosity - Part-A: 25000 - 45000 cP
- Viscosity - Part-B: 5 - 20 cP
Applications
- Protective Coating, Sealant and Adhesive for Metals and Plastics, Bonding Material for In-Place Laminates, Coating for Anode Bridges, Bus Bars, Etc,