Atkins and Pearce Acryflex®F Suflex® Class F Grade A Acrylic Coated Sleeving, MFR ID Acryflex®F Suflex®-A
- MFR #Acryflex®F Suflex®-A
- EIS #PH21-AcryflexF Suflex-A
- Series #Acryflex®F Suflex®-A
$12.07 - $1,795.36
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||||
|---|---|---|---|---|---|
 | 3 ft | 0.375 Inch | Natural | $ / Foot Pack: 102 ft/Pack | |
 | 5 Inch | 0.375 Inch | Yellow | $ / Piece | |
| 3 ft | 0.375 Inch | Yellow | $ / Foot Pack: 102 ft/Pack | |
 | 100 ft | 0.438 Inch | Natural | $ / Foot | |
| 3 ft | 0.438 Inch | Natural | $ / Foot Pack: 102 ft/Pack | |
| 3 ft | 0.5 Inch | Natural | $ / Foot Pack: 51 ft/Pack |
Suflex Acryflex-F fiberglass sleeving is a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin. Suflex Acryflex-F sleeving recommended as a universal coated sleeving for all thermal requirements from Class 105 - 155 °C. - Suflex Acryflex-F sleeving has superior mechanical and electrical properties, providing its rated dielectric strength during and after the most severe handling in your application.
Features
- Compatible with most magnet wire coatings such as polyester, acrylic, polyamide, polyimide, epoxy and phenolic
- Resistant to oils, acids, alkalis and most organic solvents
- Bends without cracking at -25 °C
- Acryflex-F sleeving is an overall superior sleeving in the 105 to 155 °C thermal rating range, Its compatibility with other components of insulation systems is equal or superior to any other type of sleeving in this temperature range
- Use of this one sleeving for class 105 °C, class 130 °C and class 155 °C applications can permit reduction of sleeving inventory with attendant savings
- Acryflex-F sleeving has superior mechanical and electrical properties, providing its rated dielectric strength during and after the most severe handling in your application
- It is fully compatible with most magnet wire coatings such as polyester, acrylic, polyamide, polyimide, epoxy and phenolic, and is proven in applications and laboratory tests in both sealed and unsealed systems
- Resistant to oils, acids, alkalies and most organic solvents, after more than 168 hours in the most commonly used aromatics, xylene and toluene, the dried sleeving substantially regains its original properties
- Low temperature, bends without cracking at 25 °C, weight Loss 2 - 3% after 24 hours at 180 °C
- Dielectric Grade: A
- Breakdown Voltage: 5000 - 7000V
Applications
- Suflex Acryflex-F Sleeving Is Widely Used in Fractional and Integral Horsepower Motors On Leads and Crossovers
- Other Uses Exist in Dry and Oil-Filled Transformers, Relays of Many Types, Radio and Television Circuits, and Welding Apparatuses
General Information
| Item Name | Acrylic Coated Sleeving |
| Trade Name | Acryflex®F Suflex® |
| Series | Acryflex®F Suflex®-A |
Design & Construction
| Braid Type | Fiberglass |
| Grade | A |
| Insulation Material | Acrylic |
| Insulation Type | Class F |
| NEMA Specification | NEMA TF-1 |
Electrical Properties
| Breakdown Voltage | 5000 V |
| Voltage Rating | 600 V |
Documents
No Documents Found