MFR #:TIH_100
EIS #:PH23-TIH_100M
Series #:TIH_100
MFR #:TIH_100
EIS #:PH23-TIH_100M
Series #:TIH_100
The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the small heater combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range. - SKF TIH Medium Induction Heater.
$16,061.65
- $17,483.98
Select from the options below
The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the small heater combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range. - SKF TIH Medium Induction Heater.
Product Options
Showing 2 out of 2 options
Voltage Rating: 460 V | Power Consumption: 4.6 kVA | EIS Part #: TIH100M/MV | $ / Piece | ||
Voltage Rating: 240 V | Power Consumption: 3.6 kVA | EIS Part #: TIH100M/230V | $ / Piece |
- Attributes
- Features
Attributes
General Information
Item NameMedium Induction Heater
SeriesTIH_100
Design & Construction
MaterialSteel And Glass Filled Polyamide
Demagnetization<2 A/cm
Performance Details
Heating Capacity120 kg
Operating Area6.1 Inch W x 8 Inch H
Time Control60 min
Electrical Properties
Frequency Rating60 Hz
Physical Properties
Bore Diameter0.8 Inch
Dimensions570 mm W x 230 mm D x 350 mm H
Coil Diameter4.3 Inch
Standard Yoke Size80 mm
Features
- Capable of heating a 97 kg (213 lb) bearing in less than 20 min
- Supplied standard with three yokes, allowing bearings with a bore diameter from 20 mm (0.8 Inch) up to a maximum weight of 120 kg (264 lb) to be heated
- Swivel arm for large size yoke
- Standard yokes (included) 80 mm (3.1 Inch), 40 mm (1.6 Inch), 20 mm (0.8 Inch) to suit bearing/work piece minimum bore diameter
- Bore Diameter: 0.8 - 15.7 Inch
- Frequency Rating: 50/60 Hz