Elantas PDG Viking™ V1380FC Solvent-Borne Impregnating Resin
MFR #:Viking™ V1380FC
EIS #:PH21-Viking V1380FC
MFR #:Viking™ V1380FC
EIS #:PH21-Viking V1380FC
Elantas PDG Viking™ V1380FC Solvent-Borne Impregnating Resin, 1.0335 g/cm3 (77 °F (25 °C)) Density, 4300 V/Mil At 25 °C/77 °F - 1.3 Mil, 3500 V/Mil At 25 °C/77 °F - 1.3 Mil After 24 hr in Water Dielectric Strength, 7 °C (ASTM D93) Flash Point, 30 min At 135 °C/275 °F or 1 hr At 120 °C/248 °F or 2 hr At 110 °C/230 °F or 4 hr At 100 °C/212 °F or 8 hr At 90 °C/194 °F Full Cure Time, 150 - 300 CP At 25 °C/77 °C Viscosity. - Viking™ V1380FC is a solvent-borne, oleoresinous impregnating resin.
$19.41
- $20.03
Select from the options below
Elantas PDG Viking™ V1380FC Solvent-Borne Impregnating Resin, 1.0335 g/cm3 (77 °F (25 °C)) Density, 4300 V/Mil At 25 °C/77 °F - 1.3 Mil, 3500 V/Mil At 25 °C/77 °F - 1.3 Mil After 24 hr in Water Dielectric Strength, 7 °C (ASTM D93) Flash Point, 30 min At 135 °C/275 °F or 1 hr At 120 °C/248 °F or 2 hr At 110 °C/230 °F or 4 hr At 100 °C/212 °F or 8 hr At 90 °C/194 °F Full Cure Time, 150 - 300 CP At 25 °C/77 °C Viscosity. - Viking™ V1380FC is a solvent-borne, oleoresinous impregnating resin.
Product Options
Showing 2 out of 2 options
 | Container Size: 36 lb | EIS Part #: V1380FC36LB | $ / US pound | |
| Container Size: 390 lb | EIS Part #: EPOV1380FCDRUM | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameImpregnating Resin
Trade NameViking™
SeriesViking™ V1380FC
General Features
Shelf Life12 Months
TypeSolvent-Borne
Design & Construction
FormLiquid
Performance Details
Full Cure Time30 min at 135 °C/275 °F or 1 hr at 120 °C/248 °F or 2 hr at 110 °C/230 °F or 4 hr at 100 °C/212 °F or 8 hr at 90 °C/194 °F
Technical Details
Flash Point7 °C
Chemical Properties
Viscosity150 cP
Electrical Properties
Dielectric Strength4300 V/mil
Features
- Low viscosity for excellent penetration
- Single-component - no separate catalyst
- UL recognized insulation systems up to class 220
- Cures at low temperature to a tough, semi-rigid film
- Dip-and Bake, vacuum-pressure impregnation application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 3.7 pounds / gallon (ASTM D3960) volatile organic content
- Non-volatile content: 47 - 49% (1.5g - 3h - 135 °C)
- 3.6 x 10^13 ohm/Sq at 25 °C / 77 °F surface resistance
- 6.6 x 10^14 ohm-cm at 25 °C / 77 °F volume resistance
- Secondary insulation
- Viscosity: 150 - 300 cP
Applications
- Impregnation of Electrical Motor Stators, Transformers and Other Wound Coils